Skip to main content

How To Make Bootable Windows 7/8 USB Pen Drive

How To Make Bootable Windows 7/8 USB Pen Drive


Make Windows 7/8 Bootable USB Pen DriveMaking bootable USB Pen Drive using Windows 7 USB /DVD Download Tool or command prompt is very easy. If you don't have CD/DVD drive on your computer and you need to boot any software or install Windows on your PC then now its very easy. And yes, boot from USB drive is much more faster then CD/DVD drive. 
So now if you want to make bootable Windows pen drive. Then follow the steps given below:

Method 1

Steps: 
1. To work with Windows 7 USB /DVD Download Tool you need an ISO image of Windows 7/8.
2. If you don't have ISO image then create it using Nero or any other burning tool. Insert the disc in your DVD Rom. Launch Nero. Make a copy of Windows Disc and save it as an ISO image.
3. Now download Windows 7 USB /DVD Download Tool from official site of Microsoft or Click Here. This is a free tool provided by Microsoft.
4. Launch Windows 7 USB/DVD Tool. Click on Browse.

Windows 7 USB /DVD Download Tool

5. Browse for the ISO image. Select the image file and click open.

Windows 7 USB /DVD Download Tool

6. Click Next.

Windows 7 USB /DVD Download Tool

7. Now in step 2 click 'USB Device' to make your USB Device bootable.

Windows 7 USB /DVD Download Tool

8. Now in step 3 click on 'Begin Copying' to start the process.

Windows 7 USB /DVD Download Tool

9. Within a few moment your USB Device will be bootable. After completion close the window.
10. Now boot from your pen drive and continue Windows installation.

Windows 7 USB/DVD Tool "Not Valid ISO" Error:

While adding ISO image in first step you may get an error message like "Not Valid ISO File".

Windows 7 USB /DVD Download Tool Error

If so then you can simply fix the problem with Power ISO with some easy steps.

Steps:
1. Download 'Power ISO' and free keygen or crack from internet.
2. Now install and run Power ISO and register.

Power ISO

3. Open your Windows 7/8 ISO image with Power ISO. 

PowerISO

4. Click on File then 'Image properties'. 

PowerISO

5. Now in 'CD/DVD File System' section click all the options(as shown in picture) and click ok.

PowerISO CD/DVD File System

6. Now in file option save the image.

PowerISO

7. Now click 'Yes' to overwrite the file. Within a few moment file will be saved.

PowerISO

PowerISO

8. Now browse for the image file and select the image file and your error will be fixed.



Method 2

This method is using command promt. 

Steps:
1. Run command promt as Administrator.(Right click on cmd click on 'Run as Administrator').

Run command promt as Administrator

2. Type 'DISKPART' in command prompt. Now type “list disk” to see all of your connected disk
drives.

Command Prompt DISKPART Utility

3. Type this following command one by one.(Here Disk 1 is the disk number of my flash drive. So make sure Disk 1 is your flash drive disk number. If not then replace ''Disk 1" with proper disk number)
1. 'select disk 1'
2. 'clean'
3. 'create partition primary'
4. 'select partition 1'
5. 'active'
6. 'format fs=NTFS QUICK'
7. 'assign'
8. 'exit'

Command Prompt DISKPART Utility

4. You'll be exited from DISKPART utility. Now use bootsect utility to make your flash drive bootable. To do so, insert the Windows 7/8 DVD in DVD drive. For this tutorial, the DVD drive is J: and the USB drive is I: (Replace this drive letter with proper drive letter of your PC)
Now type the following command in command promt one by one.
1. J:
2. cd J:\boot
3. BOOTSECT.EXE/NT60 I:

Command Prompt DISKPART Utility

Your USB drive now has been update with BOOTMGR compatible code. Now close the Command Prompt windows.
5. Now open your Windows 7/8 DVD drive and copy all files in your Flash Drive.

Copy Files

6. Everything is done. Now boot from your pen drive and continue Windows installation.

Comments

Post a Comment

Popular posts from this blog

CABLE MODEM IP Address Change

CABLE MODEM IP Address Change that way seemed alittle complicated and lenghty i pretty much do the same thing but this is how, and my isp, tmnet has never stopped me and ive changed my ip several times a day before 1. go to start/run and type in cmd 2. at the prompt type in ipconfig /all 3. write down your ip address, default gateway, and BOTH of your DNS servers 4. now here comes the troubleshooting part, this time at the prompt ping your ip with a number at the end changed Example: if your ip is 127.0.0.1 (haha) you would ping the new ip that you want to make sure it is not in use so it would look like this ping 127.0.0.2 if it comes up with request timed out 4 times then that ip is open and you can use it 5. go to control panel and then network connections 6. right click your active connection and go to properties 7. in the box in the new window highlight Internet Protocol TCP/IP (MAKE SURE THE CHECK MARK STAYS IN THE BOX!!!) 8. click on properties 9. after you fo...
Post a Comment
Read more

Firefox Speed Tweaks

Yes, firefox is already pretty damn fast but did you know that you can tweak it and improve the speed even more? That's the beauty of this program being open source. Here's what you do: In the URL bar, type “about:config” and press enter. This will bring up the configuration “menu” where you can change the parameters of Firefox. Note that these are what I’ve found to REALLY speed up my Firefox significantly - and these settings seem to be common among everybody else as well. But these settings are optimized for broadband connections - I mean with as much concurrent requests we’re going to open up with pipelining… lol… you’d better have a big connection. Double Click on the following settins and put in the numbers below - for the true / false booleans - they’ll change when you double click. Code: browser.tabs.showSingleWindowModePrefs – true network.http.max-connections – 48 network.http.max-connections-per-server – 16 network.http.max-persistent-connections-per-p...
Post a Comment
Read more